In stock.HG permanent anti-slip creates a safe grip-surface on smooth tiles & natural stonework, also in showers and baths with enamel or ceramic surfaces.

HG permanent anti-slip is suitable for use indoors and outdoors.

Using HG polish, wax and dirt remover, clean the surface to be treated. If the surface is marble, use HG marble shine finish remover.

Rinse the surface perfectly clean with water and allow to dry.

Ensure that the surface that is to be treated with HG permanent anti-slip is carefully isolated from other parts of the base-material, so that the coating remains intact on the area that is being treated. A good way to do this is to apply 2 layers of masking tape round the perimeter of the area that is to be treated.

When applying HG permanent anti-slip to floors, dilute the product with water on a 1 to 1 ratio.

When applying the product to shower cubicles and bathtubs, use HG permanent anti-slip undiluted. Be sure to use gloves.

Apply the (diluted) product with a sponge and use it to keep the surface moist during the settling period. Comply with the settling period as indicated in the user instructions on the bottle.

After the settling period, rinse the surface with HG remover, or in case of marble, with HG marmer shine finish remover in the dilution ratio indicated on the corresponding labels.

Rinse with water to remove any possible residue. Undiluted, a surface of approx.

2m² can be treated with HG permanent slip, diluted 4 m².